Manual Carton Closing Stapler, Lightweight Box Stapler for 1-3/8" Crown 3/4" Leg Staples, 100 Pcs Included, Adjustable Design for Corrugated Cardboard Cases, No-Air Needed Packaging Nailer Tool

DescriptionThe carton stapler is made of high-quality iron, aluminum, and steel, so it is strong and durable. It can contain 50 staples for one time and the ergonomic handle allows for easy operation. Meanwhile, the small size and light weight make it convenient for storage and carry. It is your ideal tool. DetailsRound Corners: The round corners can prevent scratching your hands. Ergonomic Handle: The ergonomic long handle allows you to use this product for a long time without hand soreness. Meanwhile, the rubber sleeve with non-slip patterns can play a good non-slip effect to ensure the safety of use. Staples Puller&Pusher: When you nail the staple in the wrong position, you can use this small puller to pry it open. And the staples pusher with a new structure is easy to operate and has good stapling effect.ApplicationIt is suitable for all kinds of sealed boxes, cartons, closed corrugated cardboard, etc.SpecificationColor: Yellow, BlackMaterial: Iron, Aluminum, Rubber, SteelStyle: Modern Surface Treatment: Quenching ProcessNumber of Staples: 100Capacity: 50pcsOperation Mode: ManualFeature: AdjustableGross Weight: 2.75kg/6lbsPackage Size: 42.5*14.8*12.5cm/16*5*4inchProduct Size: 30.5*8*26.7cm/12*3.15*10.5inchStaples Crown: 34.7mm/(1-3/8inch)Staples Leg Length: 18mm(3/4inch)Staples Width: 2.3mm/(0.091inch)How to Install Staples1. Pull the staples pusher to the end.2. Put the staples into the slot.3. Place the staples shaft.4. Press and hold the rear fixed shrapnel to push forward.5. Fix the shrapnel.6. The installation is complete. Package Included1* Carton Stapler1* Staples Pusher1* Staples Puller100* Staples1* Chinese ManualAll Accessories for AssemblyNotes1. Please wear safety goggles and earmuffs during operation to ensure safety. Please do not aim the product at your body to avoid injury.2. Please select the staples specification correctly to avoid jamming and other damages to the tool. 3. When the tool is stopped or repaired, be sure to take out the remaining staples in the clip.4. The machine can only be used for plane sealing, not for three-dimensional sealing and side sealing. Due to the working principle, there will be small holes on both sides of the sealing points.5. During operation, the sealing surface of the carton should be stabilized, and the machine should be close to the carton surface, otherwise it is easy to appear invalid operation.6. This product doesn't include fasteners in the package. Please prepare it in advance if needed. 7. Please read the manual completely before use, and pay particular attention to the safety instructions included. 8. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

• 34.7mm Crown Staples, Secure Carton Sealing: The carton stapler drives 34.7mm (1-3/8") crown staples with 18mm legs—ideal for double-wall cartons, shipping boxes or moving boxes, providing industrial-strength closure without compressed air .
• 50-Staple Capacity, Less Reload Downtime: Large magazine holds 50 staples—batch seal dozens of cartons without frequent refill. Perfect for small-business shipping, home-office fulfillment or craft-room packaging with this manual carton stapler.
• Quench-Hardened Steel Jaw, 6lb Workshop Tough: Jaw and driver are quench-hardened for long life; the 2.75kg frame absorbs recoil without flexing. The carton closing tool stays accurate after thousands of cartons .
• Ergonomic Handle, 30% Less Squeeze Force: Molded rubber grip and long lever reduce hand fatigue—seal moving boxes or subscription kits comfortably. The manual box stapler feels light even during marathon packing sessions .
• Adjustable Design: You can turn the adjusting bolt clockwise/counterclockwise to make the clip loose/tight. Besides, the adjusting rod can be lifted and swung left and right to adjust the penetration depth (D: deep S: shallow), making it suitable for different carton thickness.
• Tabletop Size, No Compressor Needed: At 12"*3"*10" it sits beside a printer or packing bench—no air hose, no electricity. Move the portable carton stapler from garage to craft fair without bulky compressors or cords.
• Hassle-free Installation: The simple structure, complete accessories, and a manual allow you to install the staples in a few simple steps.